Captain Line Marking Paint is ideal for creating parking lot division, indicating danger zone, marking areas visible such as zones for installing, evacuating or performing maintenance produres. Very resistant to weather and chemical agents. Can be used on many surfaces such as concrete, asphalt, glass, wood, synthetic materials. One 750ml bottle draws between 75-110m, depending on the type of coverage desired. Hi-precision strips between 6-12cm wide can be achieved, depending on the setting. Length varies according to the speed of application and surface texture.

Directions:

1. Remove all dirt and contaminants by sweeping the surface before application of the coating; 2. Shake the can well before use
3. Invert can and point at ground or floor;
4. Hold can 4-10 inches above surface to be marked;
5. Or install this can to the spraying handle or spraying cart for straight line marking.
6. Clean valve by spraying upright for 2-3 seconds after each use.

Precaution:

1. Keep away from heat, flames, sparks and any other source of ignition.
2. Do not puncture or incinerate container.
3. Store in cool and dry places at temp. Lower than 45 ℃, avoid direct sunlight.
4. Keep out of the reach of children.